Betaflight new member BLEeli_32 ESC has come, we call it Betaflight BLHeli_32 35A ESC.
This ESC is a collaboration between FPVMODEL, Betaflight, Airbot and BLHeli.
Features and Specifications
- Built in Current Sensor
- Voltage Rating: 2S-6S
- Current Rating (burst): 35A (45A)
- TX pin available for future Telemetry support (connect to FC and you would get current sensing, motor RPM, ESC temperature etc)
- DShot1200 support
- Programmable RGB LED
- Weight: 4.6g
Apart from the ESC, it also comes with several electrical wires, two 16AWG Silicon wires for power, three 20AWG wires for signal and one 26AWG red wire. All these wires are 10cm long.
- Length: 37mm (including the signal tab), 34mm (excluding the signal tab)
- Width: 16mm
- Height (thickest part): 7mm
A new additional setting”LED Control” in BLHeliSuite GUI, it is made to configure the colour of the LED on the ESC.
At the moment, it’s not doing anything fancy, it’s simply just a On/Off indicator: when the ESC is being powered the LED turns on.
Wish you good performance with Betaflight BLHeli_32 35A ESC.